In the market, home furnishings with a wide range of white latex, decoration industry is also a large amount of water-soluble adhesive, which is characterized by curing at room temperature, curing faster, higher bonding strength, the adhesive layer has good toughness And durability and not aging. Today Xiaobian introduced its daily construction method of white latex;
1, the first use of the method and the traditional use of polyvinyl acetate latex, the wood moisture content should be controlled at 8-15%, too high will affect the quality of bonding; the substrate surface treatment, the substrate surface No oil, dust and other impurities. The adhesive surface must be in full contact.
2, the coating should be uniform amount; can be cured at room temperature can also heat curing, the maximum temperature should not exceed 120 ° curing time varies due to different temperatures, according to the actual situation.
3, when the pressure should be sufficient pressure to be uniform, should be pressurized more than 1.5 hours, pressure relief should be put out for some time. In order to achieve a better bonding effect, it is best to put pressure after 24 hours and then processing, 72 hours to test.
4, mixed with some of the resin, such as urea-formaldehyde resin, phenolic resin, tripolyammon resin, etc., to improve their own water resistance and creep, pay attention to the construction of environmental conditions and personal safety and other factors.